VENTILUTION

Can-IN-Line filter is built into a metal housing with an inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.

It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.

Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor. Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, and smoke. It is desirable to mount a dust filter in front of the flow filter.

• Capacity: 1500 m³
• Flange: 250 mm
• Length: 102.5 cm
• Weight of activated carbon: 7.6 kg
• Thickness of layer of activated carbon - 5 cm
• Working life: 12 - 18 months (depending on load, humidity and dustiness)
• Diameter 36.5 cm

Recommended fans: 

• Max - Fan PRO series 200/1218 m3
• Ø250/1480m3 CAN ISO-MAX
• Airfan 1500 m3/h

The high-quality German RUCK fans, with a sturdy plastic housing, are still one of the most reliable and ideally suited for suction and suction thanks to a built-in thermal switch.

For each size of the RUCK there is a high-performance "L" model that has a larger torque engine and is more suitable for use with a carbon filter because the filter will reduce the airflow by approximately 15-20%

• Airflow rate: 240 m3 / h
• Flange: 100 mm
• Power Consumption: 65 W
• Max. Temperature: 70 ° C
• Noise level: 49-69 dB

Combiconnect  product is suitable for the Heating and Ventilation Market and industrial purposes. 

The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encаpsulated high tensile steel wire helix and covered with a mechаnical resistant PVC (Poly Vinyl Chlorid) lаyer.

• Combination of mechanical strength and high temperature.
• Temperature range -30°C / +140 °C
• Maximum air speed 30m/sec.
• Maximum pressure 3000 Pa.
• Easy to install over either round or oval ducting.

The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encаpsulated high tensile steel wire helix and covered with a mechаnical resistant PVC (Poly Vinyl Chlorid) lаyer.

• Combination of mechanical strength and high temperature.
• Temperature range -30°C / +140 °C
• Maximum air speed 30m/sec.
• Maximum pressure 3000 Pa.
• Easy to install over either round or oval ducting.

Can-IN-Line filter is built into a metal housing with an inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.

It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.

Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor.

Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, smoke. It is desirable to mount a dust filter in front of the flow filter.

• Capacity: 2500 m³
• Flange: 250 mm
• Length: 1265 mm
• Weight of activated carbon: 12.2 kg
• The thickness of the layer of activated carbon - 5 cm
• Working life: 12 - 18 months (depending on load, humidity and dustiness)
• Diameter 415 mm

Recommended fans: 

• Ø250/2310m3 CAN ISO-MAX
• Airfan Soft-box 2500 m3/h
• Max - Fan PRO series 250/1660 m3
• Can Fan RK 250L / 1170m³/h

Can Fan RK plastic tube fan, is a backward centrifugal extractor, using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control, and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design is enabling this type of fan, to deliver a strong airflow while making less noise.

• Airflow rate: 350 m³ / h
• Flange: 125 mm
• Power: 70 W
• Maximum Temperature: 70 ° C
• Operating voltage: 230 V

The Combiconnect flexible ducting is a combination of an aluminium/polyester laminated innerduct with an encаpsulated high tensile steel wire helix and covered with a mechаnical resistant PVC (Poly Vinyl Chlorid) lаyer.

• Combination of mechanical strength and high temperature.
• Temperature range -30°C / +140 °C
• Maximum air speed 30m/sec.
• Maximum pressure 3000 Pa.
• Easy to install over either round or oval ducting.

Can-IN-Line filter is built into a metal housing with an inlet and outlet, which allows it to be mounted directly in the built-in pipelines rather than at the extraction point.

It can be used as a primary filter in or outside the cultivation area or as a second air filtration filter. The Lite carries a shelf life of at least 18 months at a humidity of 70% and a temperature of 80 ° C.

Can Inline Filter is an activated charcoal filter that purifies the air and removes dangerous and smelly gases - ammonia, formaldehyde, volatile organic compounds (VOC), etc. Unlike other carbon filter models, this model has air ducts at both ends, allowing double air filtration or filter positioning after the extractor.

Can Inline degrades catalytic ozone, not designed for dust filtering, fine dust particles, and smoke. It is desirable to mount a dust filter in front of the flow filter.

• Capacity: 3000 m³
• Flange: 315 mm
• Length: 1265 mm
• Weight of activated carbon: 12.2 kg
• Thickness of layer of activated carbon - 5 cm
• Working life: 12 - 18 months (depending on load, humidity and dustiness)
• Diameter 465 mm

Recommended fans:

• Airfan Soft-box 2500 m3/h
• Ø315/2380m3 CAN ISO-MAX

Can Fan RK plastic tube fan, is a backward centrifugal extractor, using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control, and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design is enabling this type of fan, to deliver a strong airflow while making less noise.

• Airflow rate: 760 m³ / h
• Flange: 150 mm
• Power: 99 W
• Maximum Temperature: 70 ° C
• Operating voltage: 230 V

Can Fan RK plastic tube fan, is a backward centrifugal extractor, using a resistant, maintenance free plastic housing.

The extractor is speed controllable using voltage or frequency control, and as a protection for the motor, it is equipped with a thermal switch, that turns off the motor if it reaches a dangerous working temperature.

The Swiss made motor, together with the propeller design is enabling this type of fan, to deliver a strong airflow while making less noise.

• Airflow rate: 780 m³ / h
• Flange: 160 mm
• Power: 99 W
• Maximum Temperature: 70 ° C
• Operating voltage: 230 V