FERTILIZERS
VENTILATION
LIGHTING
GROWING MEDIUM
TENTS
WATER ⚘ AIR PUMPS
PH AND EC METERS
ODOR CONTROL
GROWING MEDIUM
HYDROPONICS ⚘ DRIP-FLOW SYSTEMS
ADDITIVES
FOLIAGE REMOVAL
PEST CONTROL
POTS
CONTROLLERS
ACCESSORIES
PH CONTROL
Milwaukee EK CD611 - Electronic EC Tester
The CD611 is an Electronic EC Tester
Electrically conductive measurement is the best way to test the amount of salts or solutes (TDS) in water. All EU / TDS testers compensate for temperature deviation automatically. CD611 is a specially designed tester for water analysis.
The calibration procedure is very simple and fast. This tester has an automatic temperature compensation of 100 microsims / cm in resolution and a wide range of 0 to 20000 microsims / cm.
The tester comes complete with a safety lid, a calibration screwdriver, batteries and instructions.
Technical data:
- Range: 0-20000 μS / cm
- Resolution: 100 μS / cm
- Accuracy: ± 2%
- Calibration: manually, one point
- Automatic temperature compensation
- Operating conditions: temp. 0-50 ° C, humidity up to 95%
- Batteries: 4 pcs. LR44 1.5V / 350 hours of operation
-
Code:1524
-
Weight:0.300 Kgs
Quick Buy
Table for the approximate correspondence between the electrical conductivity (in mS) and the dissolved salt concentration in parts per million (ppm):
1.0 mS (EC) = 700 ppm (TDS)
1.1 mS (EC) = 770 ppm (TDS)
1.2 mS (EC) = 840 ppm (TDS)
1.3 mS (EC) = 910 ppm (TDS)
1.4 mS (EC) = 980 ppm (TDS)
1.5 mS (EC) = 1050 ppm (TDS)
1.6 mS (EC) = 1120 ppm (TDS)
1.7 mS (EC) = 1190 ppm (TDS)
1.8 mS (EC) = 1260 ppm (TDS)
1.9 mS (EC) = 1330 ppm (TDS)
2.0 mS (EC) = 1400 ppm (TDS)
2.1 mS (EC) = 1470 ppm (TDS)
2.2 mS (EC) = 1540 ppm (TDS)
2.3 mS (EC) = 1610 ppm (TDS)
2.4 mS (EC) = 1680 ppm (TDS)
2.5 mS (EC) = 1750 ppm (TDS)
2.6 mS (EC) = 1820 ppm (TDS)
2.7 mS (EC) = 1890 ppm (TDS)
2.8 mS (EC) = 1960 ppm (TDS)
2.9 mS (EC) = 2030 ppm (TDS)
3.0 mS (EC) = 2100 ppm (TDS)
