CONTROLLERS

GSE Timer Box IV for switching several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously.

Technical specifications:
Body: WxHxD= 200x255x95mm
Timer box: WxHxD= 230x300x110mm
1 pole 1x10A 2'300W
Voltage: 230V / 50Hz
Protection class: IP54

Features:

- 1 pc. 24-hour timer
- Green dimmable display
- Designed for inductive loads
- 0-10V or PWM output
- Temperature display
- Temperature monitoring during emergency stop
- Blackout
- Sunrise/Sunset - Day counter
- Time format - 0-24h or 12 AM/PM
- Temperature format °C or °F
- Starting heating when the light is off

The timer box is used to switch several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously.

Features:
- 1 pc. 24-hour timer
- Green dimmable display
- Designed for inductive loads - 0-10V or PWM output
- Temperature display
- Temperature monitoring during emergency stop
- Blackout
- Sunrise/sunset
- Day counter
- Time format - 0-24h or 12 AM/PM
- Temperature format °C or °F
- Starting heating when the light is off

The timer box is used to switch several inductive loads such as high pressure steam lamps with high inrush current to turn ON and OFF simultaneously. The Timer Box IV has a digital display that is based on a 24-hour mechanical clock . With a left-right control button, it's an easy way to set the clock even faster than a mechanical timer. 48 segments show the current time, programmed duration, day counter and room temperature.

In the event of a power outage, the internal battery will save all your settings and the current time. (Battery life 10 years )

The timer box is ready for use. This reliable switch box comes complete with a sealed IP54 cover (the protection class offers protection against water splashes from all sides), capped plugs and a low voltage temperature sensor, making it ideal for wet rooms.

Characteristics

• 1 pc. 24-hour timer
• Green dimmable display
• Designed for inductive loads
• 0-10V or PWM output
• Temperature display
• Emergency stop temperature monitoring
• Time format - 0-24h or 12 AM/PM
• Temperature format °C or °F
• Starting heating when the light is off
• Sunrise/Sunset - Day counter

Technical specifications

• Body: WxHxD - 200x255x95mm
• Timer Box: WxHxD - 230x300x110mm
• Voltage: 230V / 50Hz
• 3 poles - 3x10A 6'900W
• 3 poles - 3x16A 11'000W CEE16A
• Protection class: IP54

Analog timer is used for automatic control (on and off) of connected equipment (lamp, pump, water tank, heater).

It can be programmed at intervals.

It can also be used in the household.

Grasslin Segmental timers are accurate to 15mins.

These timers are perfect for controlling lighting and hydroponic feeding systems. Segmental timers from Grasslin are very easy to use you just set the15 minute segments around the edge as on or off and away you go.

To safely use timers with high powered lighting you will need to also use a contactor to protect the timer from the electrical surge of HPS lighting startup. Without a contactor relay the timer will get fried and your light will not turn off.

Compact and comfortable humidity and temperature meter

• - Display: Internal temperature + Indoor humidity
• - Max / Min temperature and humidity with memory function
• - Display modes Temperature: ° C / ° F 0 ° ~ 50 ° (32 ° F ~ 122 ° F)
• - Internal Hygro Range: 25% RH to 90%
• - 1x 1.5 Volt AAA battery
• - Can be placed on a desk or on a wall

Compact and comfortable humidity and temperature meter

• - Display: Indoor / outdoor temperature + Indoor humidity
• - External temperature sensor only
• - Max / Min temperature and humidity with memory function
• - Display modes Temperature: ° C / ° F 0 ° ~ 50 ° (32 ° F ~ 122 ° F)
• - Internal Hygro Range: 25% RH to 90%
• - 1x 1.5 Volt AAA battery
• - Can be placed on a desk or on a wall

The digital humidistat plug in Cornwall mаintains the desired humidity by controlling your humidifier or dehumidifier.

he digital humidistat plug Cornwаll maintains the desired humidity by controlling your humidifier or dehumidifier.

The humidity controller plug is eаsy to install: just connect it to the socket, аnd thanks to the LCD display, you can easily set the desired humidity percentage.

• Humidity range: 20%-90%
• Parameters Humidity: +/- 10%
• Range parameters humidity: 30% - 80%
• Maximum load: 16 Amps at 230VAC or 125VAC 60 Hz
• Maximum load: 15 Amps at 125VAC

This unit is designed to control heating / cooling as needed.

In the first case, connecting the power unit when it detects temperatures below the set point, in the second connects the electrical current is detected recorded temperatures above the point.

• Voltage range: 230V AC/50HZ
• Load (max.): 3680W 16A - Load Resistance. 2A 460W - inductive load.
• Operating temperature: 0 º C ~ 40 ° C.
• Storage temperature: -10 ° C ~ 50 ° C
• Scale control of temperature: 5 ° C (40 ° F) ~ 30 ° C (85 ° F) Accuracy: ± 1 ° C Measurement Period: 10 S.

The PLANT!Т Water Timer can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir.

Simply select the time you want the water supply to be turned on and off, link up to your irrigation dripper line and the timer will do the rest.

• 2 easy steps to programme – turn RUN TIME dial to desired irrigation time and turn FREQUENCY dial to desired time you want between irrigations.
• Ideal for gravity feed allotment systems to control feed from a water butt/reservoir
• Operated with two 1.5v AAA alkaline batteries (not included) that can last a full season without needing to be changed
• Auto safety valve shut-off when battery power is low and programme delay button for when you need to do plant maintenance work and don’t want to be irrigating

Specifications:

• Working pressure range: 0-150 PSI (0-10 BAR)
• Connection: ¾ male/female tap/hose connector
• Frequency: Can select to irrigate every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week
• Run (on) time: 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes